Its not those Golden Arches . The nearest McDonalds is in Elgin, 194 miles away.
I've run out , temporarily, of the ingredients to make concrete , so I've got on with the next bit . They supply recycled hoops from Salmon Farms, which need to be cut to size and then placed over the trimmed posts.
The hoops as they arrive are about 9 metres long. the finished length will be about 6.5 metres.
Cutting the hoops is easy.
Lifting them isnt quite so easy.
Getting it aligned with , and lifted on to the post is a bit tricky. If you get it wrong, the hoop hits you on the head.
Once aligned, sliding them down one post is easy .
Getting the other end of the hoop is tricky.
They are quite rigid .
So when its on one post , it sticks up in the air.
The suggested way to retrieve it , if single-handed is with a rope and pull it down .
And then hauling it down and pulling it onto the second post is hard work
T
Things I have learned
Bits of mortar on the post mean the hoops doesn't slide down
Some of the hoops have a bit of a curve to them . its easier to work with the curve
If the hoop hits you on the head, it hurts
Once its on the post, I suspect there is a lot of sweating and hard work to get the hoop off the post, if necessary . Just as well , as it can be a bit windy in the winter
So we have decided that we would like a larger greenhouse. Polytunnels are popular here , but the average life expectancy is 3-4 years ,shredded eventually by the wind. We heard about the polycrub
As they are made in Shetland, we reckoned that a polycrub would be likely to withstand the wind.
So its going on a bit of the hardstanding out the back .
But there are a several problems.
1. Well-compacted hardcore .
Initially it was going to be raised beds , but on further consideration it would be more flexible to put it on the soil. So the hardcore has to come up . And i think we might need some topsoil . There some being removed from the new hospital site . I wonder what they are doing with the removed topsoil ?
2. A slope
The construction guide is for a level site. We have a slope. When I measure it there is approximately 300mm drop along the northerly edge . So the northeast corner would be 300 mm lower than the northwest corner ( the highest point) . And there is a slope north to south, and the southeast corner will be a further 150 mm lower.
3. bedrock
The installation guide says put the supporting posts in 600mm. Digging down, we hit bedrock after 200-450 mm.
So the first thing is to see if we can drill a hole. Peter the Fencer arranged for some help
and then to drill some holes
And it wasn't just in one spot
And at the shallowest point ,the bedrock is about 15 cm down.
The solution for both the slope and the depth of the holes , is shuttering the posts . Which is what they do in Shetland whne erecting these things and the holes for the posts can't go deep enough
So the gap between the posts is filled with concrete , supporting the posts and getting the whole things level. Hence the cement mixer
Altogether I reckon I could need 0.7 cu metres of concrete . ive been told by a retired engineer that a cubic metre of concrete weight 2.5 t. So altogther I'll be putting down 1.75t of concrete.
That should hold it .
But i might just run this past a structural engineer for my own peace of mind.
Ferdinand , the orphan lamb, has been moved out into the field. He has hisown bit, with a shelter if the weather is bad . And the bottle-feeding has stopped and he is now on a bucket. (Goats) milk gets added a couple of times a day and milk is taken 'ad lib'. He is also starting to graze on the grass.
The last ewe to lamb is due on the 13th, but things got going a could of days early.
We can recognise the signs of early labour , which happened in the early afternoon, but things changed and the typical behaviour - pawing the ground and separating herself off fromt he other sheep , didnt happen.
So come the evening we had to have a look.
it was an obstructed labour with the first lamb in an abnormal position whih needed some manual help to get it delivered
Eventually two lambs were born
.Some video a few minutes after birth
the mother didnt start immediaitly licking them dry , so we realised something was remiss.
We brought them inside as they were wet, it was wet and the mother 'wasnt right' and got them dried off
And the vet came and had a look atr the mother - and diagnosed a perforated uterus - an unsurvivable condition.
So some colostrum was taken from the ewe and then tube-fed to the lambs
And now we have our own cady (orphan) lamb - so its back to bottle feeding every 4 hours or so until they are a bit bigger and can join the other lambs